12 – English
5. Adjust the cutting deck to its highest position by
pressing the button as shown in the illustration.
6. Turn the mower on its side. Use a wooden blocks to
stabilize the mower. Lock the blade with a wooden
block
7. Remove the blade.
8. Use a hook to lift of the spring with a rm and
explosive movement.
9. Remove the shaft and cirlip to detach the height
mechanism from the link arm
10. Pull off the link arm and tube as one unit then
remove the wheel axle.
11. Pull out the bushing using a pair of pliers.
12. Remove the belt cover for ease of access.
13. Remove the belt.
14. Remove the inspection cover for ease of access.
Repair instructions
To Next Page
Loading...
