8 – English
Delivery and service
2.3.4 To do a test of the drive (LC 247S, LC
247SP)
1. Start the engine.
2. Pull the propulsion bar in the direction of the handle
to start the drive.
On machines with variable speed, this is adjusted with
the control on the left-hand side.
2.3.5 Speed control
Examine the maximum engine speed with a Husqvarna
original tachometer. Adjust the maximum speed
according to the table.
Model
RPM
LC 253S, LC 353V, LC 353VI
2800 ± 100 rpm
LC 347VI, LC 347V, LC 247,
LC 247S, LC 247SP
2900 ± 100 rpm
2.4 Final inspection
Before releasing the product to the customer make sure
that:
• The blade is correctly attached and that the blade
turns correctly.
• The blade stops spinning when the blade stop is
engaged.
• The safety inhibitor is undamaged and works
correctly.
• The engine brake arm is undamaged and works
correctly.
• All nuts and bolts are attached with the correct
torque.
• The chassis is undamaged.
• The handle is undamaged.
• The wheels are attached correctly and undamaged.
To Next Page
Loading...
