Husqvarna LC18 User Manual

10 – English
ASSEMBLY
Assembly of the handlebar
Assemble the handlebar with 2 screws on each side of the
handlebar.
Fitting the handlebar
Take care not to damage the cables and wires when you fold
up the handlebar.
Lift up the handlebar until the handlebar's upper tubular
construction comes directly opposite to the handlebar's lower
section. Tighten the knob correctly.
Assembly of the catcher
• Lift the rear deflector and insert the grass catcher
correctly so that the rear deflector locks down over the
opening in the grass catcher.

Husqvarna LC18 Specifications

General

Engine Type	4-stroke
Cutting Width	46 cm
Drive Type	Push
Wheel Size	Front 170 mm, Rear 203 mm
Engine	Briggs & Stratton
Weight	60 lbs