Husqvarna LE389 User Manual (English)

Other manuals for Husqvarna LE389

Operator's Manual48 pages

Instruction Book33 pages

Questions and Answers:

W
William UnderwoodAug 18, 2025
Why is my Husqvarna Edger engine difficult to start?
- K
  Kelli CampbellAug 18, 2025
  There are several reasons why your Husqvarna Edger engine might be hard to start. It could be due to stale fuel, so drain the tank and refill with fresh fuel. Another possibility is dirt in the fuel tank or simply running out of fuel; in that case, drain and clean the fuel tank before refilling. A fouled spark plug or a dirty air filter can also cause this issue; try cleaning and setting the spark plug gap or cleaning/replacing the air filter. If the carburetor is out of adjustment, contact an Authorized Husqvarna service dealer.
T
timothy23Aug 20, 2025
Why is my Husqvarna LE389 difficult to start or running erratically?
- D
  Diane BrownAug 20, 2025
  If your Husqvarna Edger is difficult to start or runs erratically, it might be due to several reasons. First, stale fuel could be the culprit; in this case, drain the fuel tank and refill it with fresh fuel. A defective or fouled spark plug can also cause this issue; try cleaning and re-gapping it, or replace it if necessary. Additionally, check for a clogged fuel line and replace the fuel filter if needed. It's also worth checking the fuel line for blockages or if the fuel tank is empty, in which case you should clean the fuel line and check the gas tank. A clogged air cleaner may also be the reason, so tap it clean or replace it. If the carburetor is out of adjustment, have it adjusted.
J
Joshua CunninghamAug 23, 2025
What to do if Husqvarna LE389 blade will not rotate?
- R
  Ryan TaylorAug 23, 2025
  If the cutting blade of your Husqvarna Edger isn't rotating, first check for any debris interfering with the blade and clean it. If that's not the issue, the blade might be loose, so try tightening the blade nut. A damaged V-belt could also be the cause, requiring you to replace it.
I
iwatkinsAug 26, 2025
How to fix a Husqvarna LE389 Edger blade that will not cut properly?
- B
  brent61Aug 26, 2025
  If your Husqvarna Edger blade isn't cutting properly, it could be due to damaged quill bearings, in which case you should replace the quill assembly. Another reason could be a damaged or worn blade, so consider replacing the blade.
V
vstarkAug 28, 2025
What to do if my Husqvarna LE389 Edger blade will not rotate?
- S
  Scott DiazAug 28, 2025
  If the cutting blade of your Husqvarna Edger won't rotate, it might be due to debris interfering with the blade; clean any debris from the blade. Another cause could be a loose blade, so you should tighten the blade nut. Finally, a defective V-belt could be the problem, requiring you to replace the V-belt.
J
John SmithAug 31, 2025
What to do if my Husqvarna LE389 Edger blade will not cut properly?
- R
  Raymond WilliamsAug 31, 2025
  If the blade on your Husqvarna Edger isn't cutting properly, it could be due to defective quill bearings, in which case you should replace the quill assembly. Alternatively, the blade might be damaged or worn, so try reversing or replacing it.
B
bryan49Sep 2, 2025
What to do if the cutting blade on my Husqvarna LE389 fails to turn?
- M
  Michael QuinnSep 2, 2025
  If the cutting blade on your Husqvarna Edger fails to turn, there are several potential causes. First, check for any foreign objects jamming the blade and clear any obstruction. If the blade is loose, tighten the blade retaining nut. A defective belt could also be the problem, requiring you to replace the V-belt. Additionally, defective quill bearings or a sticking quill rod can prevent the blade from turning. In this case, replace the bearings or lubricate the tube and rod, respectively.
H
hdiazSep 5, 2025
Why is there excessive vibration in my Husqvarna LE389?
- S
  stephen44Sep 5, 2025
  If your Husqvarna Edger vibrates excessively, stop the engine immediately and tighten all bolts, as loose parts may be the cause. If the vibration continues, take the unit into the nearest Service Center.
D
Daniel RuizSep 7, 2025
Why does my Husqvarna Edger engine smoke excessively?
- S
  sarah05Sep 7, 2025
  Excessive smoke from your Husqvarna Edger engine is often caused by a dirty air filter. Try cleaning or replacing the air filter to resolve this issue.
C
cmillerSep 9, 2025
What to do if my Husqvarna Edger has excessive vibration?
- A
  Amy BarkerSep 10, 2025
  If your Husqvarna Edger is vibrating excessively, stop the engine immediately and tighten all fasteners, as this could be due to loose parts.