To Next PageTo Next Page
Need help?Do you have a question about the Husqvarna LTH151 and is the answer not in the manual?
General| Engine Manufacturer | Briggs & Stratton |
|---|---|
| Engine Power | 15 hp |
| Cylinders | 1 |
| Fuel Tank Capacity | 5.7 L |
| Transmission Type | Hydrostatic |
| Cutting Height, min | 38 mm |
| Cutting Height, max | 102 mm |
| Blades | 2 |
| Blade Engagement | Manual |
| Deck Material | Steel |
| Displacement | 500 cc |
| Turning Radius | 18 inches |
| Tire Size, front | 15x6-6" |
Reduce fire risk, inspect and remove debris before use, refuel, and inspect for damage.
Do not operate in confined spaces, mow in daylight, disengage blade clutches, and follow slope guidelines.
Key positions: OFF, ROS ON, ON, START. Never leave key in ignition when unattended.
Use unleaded petrol, fill outdoors, do not smoke, check cap, store safely. WARNING: Petrol is highly flammable.
Procedure to remove trapped air from transmission before first use or after service.
Do not drive on slopes >15°. Avoid stopping/starting on slopes. Do not mow parallel to slopes.
Disconnect spark plug wire, press brake pedal, engage parking brake, neutral lever, disengage clutch.
Drain hot oil carefully using extension. Reinstall plug. WARNING: Do not overtighten.
Check fuel, plug, connections, carburetor, fuel pipe.
Check battery, contacts, lever position, fuse, ignition lock, safety contact, pedal position.
Check gear, plug, carburetor, air filter, fuel tank vent, ignition, fuel pipe.
Check air filter, plug, carburetor, fuel pipe, carburetor setting.
Check overload, blocked inlets/fins, fan, oil level, ignition, plug.
