EasyManua.ls Logo

Husqvarna LTH1742 User Manual

Husqvarna LTH1742
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
02596
LTH1742
Owner's Manual

Questions and Answers:

Husqvarna LTH1742 Specifications

General IconGeneral
EngineBriggs & Stratton
Engine ManufacturerBriggs & Stratton
Engine Power17 HP
Cylinders1
Cutting Width42 inches
Cutting Height, min1.5 inches
Cutting Height, max4 inches
Blade EngagementManual
TransmissionHydrostatic
Transmission TypeAutomatic
Transmission ManufacturerHydro-Gear
Deck MaterialSteel
Weight450 lbs
Tire Size, front15x6-6
Tire Size, rear20x8-8
Cutting Height1.5-4 inches
Fuel Capacity2.5 gallons
Fuel Tank Capacity2.5 gallons

Summary

SAFETY RULES

GENERAL OPERATION

Read, understand, and follow all instructions before starting. Ensure area is clear and only responsible adults operate.

SLOPE OPERATION

Operate with extra caution on slopes. Mow up and down, not across. Avoid sudden changes in speed or direction.

CHILDREN

Keep children out of mowing area. Be alert for children when backing or operating. Never carry children.

OPERATIONAL SAFETY WARNINGS

Preventing Accidental Starting

Disconnect spark plug wire before setting up, transporting, or making repairs to prevent accidental starting.

Hill Coasting and Towing Hazards

Warning against coasting downhill in neutral and guidelines for towing attachments on slopes.

ASSEMBLY

OPERATION

WEAR SAFETY GLASSES

Emphasizes wearing safety glasses or eye shields to prevent severe eye damage from thrown objects.

MOWER OPERATION AND TRANSPORT

Steps to operate the mower, stop blades, and procedures for safely transporting the tractor.

FUELING AND STARTING PROCEDURES

Instructions for adding gasoline and starting the engine, including cold weather and warm-up procedures.

HAZARD AND SAFETY ALERT SYMBOLS

Definitions of DANGER, WARNING, CAUTION, and HOT SURFACES symbols indicating potential risks.

TRACTOR CONTROLS AND FUNCTIONS

Overview of key controls including attachment clutch, lights, throttle, brake, freewheel, motion control, and lift levers.

OPERATING PROCEDURES

Setting the parking brake, stopping the tractor, using the throttle control, and adjusting cutting height.

CONTROLLING MOVEMENT

Instructions on controlling tractor movement forward and backward using the motion control lever.

MAINTENANCE

MAINTENANCE SCHEDULE

Schedule outlining regular service intervals for tractor and engine components before each use, every 8, 25, 50, 100 hours, season, and storage.

TRACTOR MAINTENANCE

Checks and maintenance for brakes, tires, operator presence system, and blade care, including removal and sharpening.

TRANSAXLE AND ENGINE LUBRICATION

Maintaining transaxle cooling and engine lubrication, including oil change procedures.

SERVICE AND ADJUSTMENTS

MOWER REMOVAL AND INSTALLATION

Step-by-step instructions for removing and installing the mower deck from the tractor.

MOWER DECK ADJUSTMENTS

Procedures for side-to-side and front-to-back adjustment of the mower deck for optimal cutting.

BRAKE CHECKS AND ADJUSTMENT

Steps to check brake effectiveness and detailed instructions for adjusting the brake rod.

MOWER HOUSING LEVELING

Instructions for leveling the mower housing side-to-side and front-to-rear for optimal cutting.

BELT REPLACEMENT AND BRAKE ADJUSTMENT

Instructions for replacing the mower blade drive belt and checking/adjusting the tractor's brake system.

DRIVE BELT REPLACEMENT AND MOTION CONTROL ADJUSTMENT

Procedures for replacing the motion drive belt and adjusting the transmission's neutral position.

STARTING WITH A WEAK BATTERY AND REPLACING BATTERY

Guidance on jump-starting a tractor with a weak battery and steps for safely replacing the battery.

STORAGE

TRACTOR AND ENGINE PREPARATION FOR STORAGE

Instructions for preparing the tractor and engine, including fuel system treatment and draining oil.

TROUBLESHOOTING POINTS

SCHEMATIC

SAFE SLOPE OPERATION GUIDE

Related product manuals