Dismantling the Swing Axle
Remove the cables from the battery terminals and remove
the battery.
Remove the battery shelf.
Remove the fastening bolts and control rods for the axle.
Remove the swing axle.
Dismantling/Assembling the Drive
Chain
M105-97F and G105-85F
Remove the foot plate.
Cut the drive chain.
Fit a new drive chain with a master link.
Adjusting the Drive Chain
Loosen the four screws and slide the plate forward by hand to
tighten the chain.
Tighten the chain.
REPAIR INSTRUCTIONS
15 – English
To Next Page
Loading...
