Engine Frame
Manufacturer Briggs & Stratton Cutting Width 61" (155 cm)
Type 49S877 Endurance Cutting Height 1½"-4½" (3.8-11.4 cm)
Power
27 HP
1)
Uncut Circle 0
Lubrication Pressure with oil filter Number of Blades 3
Fuel Min 87 octane unleaded (Max
ethanol 10%, Max MTBE 15%)
Blade Length 21" / 53.3 cm
Fuel tank capacity 5 gallons / 18.8 liters Nose Roller Yes
Cooling Air cooled Sprung Seat Suspension
Air filter Cyclonic Hinged Arm Rests Yes
Alternator 12v 15 amp @ 3600 rpm Service Minder Digital
Starter Electric Blade Engagement 200 ft-lb Warner Clutch
Transmission
Deck Construction 11 gauge fabricated
Transmission ZT3100 Hydro Gear Productivity 4.2 acres/h / 16,997 m2/h
Steering control Dual levers, foam gripped
Dimensions
Speed forward 0-8.5 mph / 0-13.7 km/h Weight 770 lbs / 349 kg
Speed reverse 0-4.5 mph / 0-7.2 km/h Base Machine Length 75½" / 192 cm
Brakes Mechanical Base Machine Height 42"/ 107 cm
Front caster tires 13 x 6.5 - 6 Base Machine Width 49" / 125 cm
Rear tires, turf pneumatic 22 x 10-10 Overall Width, Chute Up 62½" / 158 cm
Tire pressure 15 PSI / 103 kPa / 1 bar Overall Width, Chute Down 76" / 193 cm
1)
The power rating as declared by the engine
manufacturer is the average gross power output at
the specified RPM of a typical production engine for
the engine model measured using SAE Standards for
engine gross power. Refer to the engine manufacturer
engine specifications.
34
TECHNICAL DATA
To Next Page
Loading...
