34
TECHNICAL DATA
Engine Frame
Manufacturer Kawasaki Cutting Width 52" (133 cm)
Type FR651V Cutting Height 1½"-4½" (3.8-11.4 cm)
Power 17.9 kW @ 3600 RPM
1)
Uncut Circle 0
Lubrication Pressure with oil filter Number of Blades 3
Fuel Min 87 octane unleaded (Max
ethanol 10%, Max MTBE 15%)
Blade Length 18" / 46 cm
Fuel tank capacity 18.9 liters / 5 gallons Nose Roller Yes
Cooling Air cooled Sprung Seat Suspension
Air filter Heavy Duty Hinged Arm Rests Yes
Alternator 12V Service Meter Digital
Starter Electric Blade Engagement Ogura Clutch
Transmission
Deck Construction 11 gauge fabricated
Transmission ZT-3100 hydrostatic
transaxles
Productivity 3.5 acres/h / 14,164 m2/h
Steering control Dual levers, foam gripped
Dimensions
Speed forward 0-10.5 km/h Weight 813 lbs / 369 kg
Speed reverse 0-5.6 km/h Base Machine Length 75½" / 192 cm
Brakes Mechanical park brake Base Machine Height 42" / 107 cm
Front caster tires 13 x 6.5 - 5 Base Machine Width 49" / 125 cm
Rear tires, turf pneumatic 22 x 10.5-8 Overall Width, Chute Up 53¼" / 135 cm
Tire pressure 15 PSI / 103 kPa / 1 bar Overall Width, Chute Down 67" / 170 cm
Overall Height, ROPs Up 72" / 170 cm
1)
The power rating as declared by the engine manufacturer is the
average gross power output at the specified RPM of a typical
production engine for the engine model measured using SAE
Standards for engine gross power. Refer to the engine manufacturer
engine specifications.
To Next Page
Loading...
