To Next PageTo Next Page
Need help?Do you have a question about the Husqvarna R 145 and is the answer not in the manual?
General| Drive Type | Rear-wheel drive |
|---|---|
| Engine Manufacturer | Briggs & Stratton |
| Engine Type | 4-stroke |
| Cutting Height Adjustment | Central |
| Grass Collector Volume | 50 liters |
Learn safe and effective operation by reading instructions and understanding controls.
Prepare the machine and work area by inspecting, clearing debris, and refueling safely.
Follow guidelines for safe mowing, including awareness of surroundings and proper techniques.
Ensure safe working condition and proper storage to prevent hazards.
Instructions for correctly assembling and tightening the mower handle and related components.
Steps to assemble the grass catcher frame and securely attach it to the mower.
Procedure for safely removing and emptying collected grass from the catcher.
Set up the mower to collect grass in the rear bag.
Configure the mower for mulching grass clippings.
Set up the mower for side discharge of grass clippings.
Adjust the mower's cutting height by ensuring all wheels are at the same level.
Set the mower handle to different height levels for user comfort.
Add engine oil to the correct level using SAE30 oil, referring to engine instructions.
Follow procedures for starting a cold or warm engine, including priming and brake yoke use.
Learn how to safely stop the engine by releasing the brake yoke.
Avoid mowing on slopes steeper than 15° to prevent engine lubrication problems.
Remove twigs, toys, stones, and other objects from the lawn before mowing.
Mow twice weekly, cut no more than 1/3 of grass length, adjust height for conditions.
Always disconnect the spark plug lead before performing maintenance or repairs.
Tighten screws and nuts after 5 hours, and check the engine oil level.
Stop the engine and check the oil level using the dipstick; ensure it's between FULL and ADD.
Perform annual grinding and balancing of the cutter blade at a service workshop.
Replace engine oil annually or after 25 hours of operation, using SAE30 oil.
Clean the air filter cartridge by removing the lid and loosening the screw.
Procedure for cleaning the mulching door, connecting water, and running the engine briefly.
Prepare for transport by disconnecting the spark plug lead and emptying fuel and oil tanks.
