2. ENGINE First
servicing
Maintenance interval
in hours
50 100 200
Clean the engine and the hydrostatic transmission. O
Do a check of the muffler and the heat deflector. O O
Replace the engine oil. Refer to
To replace the engine oil and oil filter on page
24
.
O
100
hours or
one (TN)
time each
year
Replace the engine oil filter. O O
Replace the spark plug. O
Do a check of the battery and charge if it is necessary. O O
3. TRANSMISSION, CONTROLS AND DRIVE SYSTEM First
servicing
Maintenance interval
in hours
50 100 200
Do a check of the cooling fan on the hydrostatic transmission. O O
Do a check of the oil in the transmission and fill if it is necessary. Refer to
To do
a check of the transmission oil level on page 25
.
O
Examine and adjust the parking brake. O O
Replace the oil in the transmission. Refer to
Technical data on page 29
. O O
4. CUTTING EQUIPMENT First
servicing
Maintenance interval
in hours
50 100 200
Clean the outer and inner surfaces of the cutting deck and the cutting deck cov-
ers.
O O
Do a check of and adjust the cutting height. O O
Do a check of and adjust the parallelism of the cutting deck. O O
Do a check of the blades in the cutting deck. Sharpen and balance the blades if
it is necessary.
O
16 1590 - 006 - 20.10.2021
To Next Page
Loading...
