8. Remove the heat shield on the exhaust pipe if the
product has a Kawasaki engine.
9. Remove the clamp on the exhaust pipe.
10. Remove the nuts that hold the exhaust pipe and
remove the exhaust pipe.
11. Remove the transmission belt spring from the belt
tensioner.
12. Lift the transmission belt from the tension pulley.
13. Remove the engine pulley covers on the left and
right side of the product. Do not mix the screws.
14. Remove the belt guide for the engine belt pulley.
855 - 002 - 28.03.2019 Repair instructions - 29
To Next Page
Loading...
