1. PREPARE THE PRODUCT First
servicing
Maintenance interval
in hours
50 100 200
Lubricate the pedals on the inner side of the frame tunnel. O
Lubricate the belt tensioner. O
Remove the drive wheels and grease the axels. O
2. ENGINE First
servicing
Maintenance interval
in hours
50 100 200
Do a check of the fuel hose. Replace if it is necessary. O
Replace the fuel filter. Refer to
To replace the fuel filter on page 22
. O
Replace the air filter. Refer to
To clean and change the air filter on page 22
. Clean O
Do an inspection of the cooling fins on the hydrostatic transmission. O
Clean the engine and the hydrostatic transmission. O
Do a check of the muffler and the heat deflector. O O
Replace the engine oil. Refer to
To change the engine oil and the oil filter on
page 28
.
O
100
hours or
one (TN)
time each
year
Replace the engine oil filter. Refer to
To change the engine oil and the oil filter
on page 28
.
O O
Replace the spark plug. Refer to
To examine and replace a spark plug on page
23
.
O
Do a check on the lights (if applicable). O O
Update the firmware (if applicable). O O
Do a check of the battery and charge if it is necessary. O O
3. TRANSMISSION, CONTROLS AND DRIVE SYSTEM First
servicing
Maintenance interval
in hours
50 100 200
Do an inspection of and adjust the front and rear wheel rotation speed (only
AWD).
O O
Replace the transmission filter (only AWD). O O
Replace the spin on filter for the servo (if applicable). O O
Do a check of the cooling fan on the hydrostatic transmission. O O
838 - 007 - 03.11.2021 19
To Next Page
Loading...
