EasyManua.ls Logo

Husqvarna Rider 20 ProFlex User Manual

Husqvarna Rider 20 ProFlex
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Please read these instructions carefully and make sure
you understand them before using the machine.
101 90 83-26
Operator´s manual
Rider 20 ProFlex

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Husqvarna Rider 20 ProFlex and is the answer not in the manual?

Husqvarna Rider 20 ProFlex Specifications

General IconGeneral
BrandHusqvarna
ModelRider 20 ProFlex
CategoryLawn Mower
LanguageEnglish

Summary

SAFETY INSTRUCTIONS

General use safety

General operational safety guidelines, including familiarization with controls and protective gear.

Driving on slopes safety

Critical safety advice for operating the machine on inclines to prevent tipping and loss of control.

Children safety

Precautions to prevent accidents involving children near the operating machine.

Maintenance safety

Safety precautions to be followed during maintenance, especially concerning fuel and battery.

PRESENTATION

Location of the controls

Identifies and labels all controls on the Rider 20 ProFlex for user reference.

Throttle control

Explains how the throttle control regulates engine speed and blade rotation.

Speed limiter

Details the operation of the speed limiter pedals for forward and reverse movement.

Lift lever for cutting unit

Explains how to use the lift lever to position the cutting unit for transport or mowing.

Lever for adjustment of the cutting height

Describes the 7-position lever for adjusting the cutting height and tyre pressure.

Parking brake

Details the procedure for applying and releasing the parking brake.

Fuelling

Guidance on the correct type of fuel and safety precautions during refueling.

DRIVING

Starting the engine

Step-by-step instructions for starting the engine, including choke and ignition use.

Driving the machine

Instructions on how to operate the pedals to drive the machine forward and in reverse.

Stopping the engine

Procedure for safely stopping the engine, including idling and lifting the cutting unit.

MAINTENANCE

Maintenance schedule

A comprehensive list of maintenance tasks and their recommended intervals (daily, weekly, yearly, hours).

Adjusting the brakes

Detailed procedure for adjusting the parking brake for optimal braking performance.

Check the safety system

Verifying the function of safety systems that prevent operation under unsafe conditions.

Setting the parallelism and height for the cutting unit with rear ejector and BioClip unit

Adjusting the cutting unit's parallelism and height for optimal cutting performance.

Checking and adjustment of the cutting unit's ground pressure

Adjusting the cutting unit's ground pressure for optimal cutting results.

Changing the oil

Instructions for changing the engine oil at specified intervals, including safety warnings.

TROUBLE SHOOTING SCHEDULE

STORAGE

Winter storage

Comprehensive instructions for preparing the machine for winter storage, including fuel and battery care.

SERVICEJOURNAL

Related product manuals