EasyManua.ls Logo

Husqvarna Rider ProFlex 21 AWD User Manual

Husqvarna Rider ProFlex 21 AWD
96 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Operator´s manual
Rider ProFlex 21 AWD
Please read these instructions carefully and make sure
you understand them before using the machine. English

Table of Contents

Other manuals for Husqvarna Rider ProFlex 21 AWD

Questions and Answers:

Husqvarna Rider ProFlex 21 AWD Specifications

General IconGeneral
ManufacturerHusqvarna
Warranty2 years
TypeRider
FuelPetrol
Drive TypeAWD
TransmissionHydrostatic
Engine TypeV-twin
Cutting Height AdjustmentLever-operated

Summary

INTRODUCTION

Congratulations

Acknowledges the purchase of the Husqvarna Rider and its design concept.

Proper Service

Details how Husqvarna products are sold and serviced by specialized dealers for optimal support.

KEY TO SYMBOLS

Symbols and Decals

Explains the importance of understanding symbols and decals found on the Rider and in the manual.

SAFETY INSTRUCTIONS

General Use

Provides essential safety guidelines for operating the machine, including reading the manual and being aware of surroundings.

Driving on Slopes

Offers crucial safety advice for operating the Rider on inclines to prevent accidents and overturning.

Maintenance Safety

Outlines critical safety precautions to be taken before performing any maintenance on the engine or cutting unit.

PRESENTATION

Placement of Controls

Identifies and labels the various controls and components on the Rider's operating console.

Throttle Control

Explains the function of the throttle for regulating engine speed and blade rotation.

Cutting Unit

Describes the types of cutting units compatible with the Rider ProFlex 21 AWD.

Parking Brake

Details the procedure for activating and deactivating the parking brake system.

DRIVING

Mowing Tips

Offers practical advice for optimal mowing results and efficient operation of the Rider.

Running the Engine

Guides the user through the process of preparing and starting the Rider's engine safely.

Driving the Rider

Explains how to safely operate the Rider, including acceleration and deceleration.

MAINTENANCE

Maintenance Schedule

Lists required maintenance procedures and their recommended intervals for the Rider.

Removing Covers

Provides step-by-step instructions for safely removing various covers for access to internal components.

Adjusting the Parking Brake

Details the procedure for checking and adjusting the parking brake for proper functionality.

Replacing the Air Filter

Guides the user on how to replace the air filter to maintain engine performance.

Checking Tyre Pressures

Explains the importance and procedure for checking the tyre pressure for optimal operation.

Attaching the Cutting Unit

Provides instructions on how to safely connect the cutting unit to the Rider.

Adjusting Cutting Height and Alignment

Details how to adjust the cutting height, parallelism, and ground pressure of the cutting unit.

LUBRICATION

Lubrication Schedule

Presents a schedule outlining lubrication points and frequencies for daily, weekly, and interval maintenance.

General Lubrication Guidelines

Offers general advice and precautions for lubricating the Rider's components.

Lubrication Points in Frame Tunnel

Details lubrication procedures for the pedal mechanism and chains within the frame tunnel.

Engine Oil Level Check

Explains how to check and top up the engine oil to the correct level.

Hydraulic Oil Filter Change

Guides the user through the process of changing the hydraulic oil filter.

TROUBLE SHOOTING

Troubleshooting Guide

Provides a guide to identify and resolve common problems encountered with the Rider.

STORAGE

Winter Storage

Offers instructions for preparing and storing the Rider during the off-season or for extended periods.

ELECTRICAL AND HYDRAULIC SYSTEMS

Electrical System Overview

Illustrates the component locations and wiring of the Rider's electrical system.

Hydraulic System

Explains the hydraulic system's components, function, and maintenance requirements.

TECHNICAL DATA

Specifications

Lists detailed technical specifications and dimensions for the Rider ProFlex 21 AWD.

EU DECLARATION OF CONFORMITY

Declaration of Conformity

States the Rider's compliance with relevant European directives and standards.

SERVICE JOURNAL

Service Journal Overview

Introduces the service journal for documenting maintenance and repair history.

25-Hour Service

Outlines the maintenance tasks to be performed after the first 25 hours of operation.

50-Hour Service

Details the maintenance tasks required at 50-hour intervals.

300-Hour Service

Specifies the comprehensive service procedures to be conducted every 300 hours.

100/200-Hour Service

Lists maintenance tasks for 100 and 200-hour service intervals.

Related product manuals