CONTROLS
17
This operator’s manual describes the Husqvarna Zero
Turn Rider. The rider is fitted with a Briggs & Stratton
four-stroke overhead valve engine.
Transmission from the engine is made via belt-driven
Control Locations
1 2
3
4
5 6 8 97
hydraulic pumps. Using the left and right steering
controls, the flow is regulated and thereby the
direction and speed.
8058-111
1. Cutting height handle
2. Park brake
3. Choke/throttle control
4. Ignition switch
5. Blade control lever
6. Motion control levers
7. Fuel tank cap
8. Fuel shut off valve
9. Bypass linkage
To Next Page
Loading...
