To Next PageTo Next Page
Need help?Do you have a question about the Husqvarna RZ4824F and is the answer not in the manual?
General| Engine Manufacturer | Kawasaki |
|---|---|
| Engine Power | 24 hp |
| Cutting Width | 48 inches |
| Cutting Height | 1.5 - 4 inches |
| Fuel Capacity | 3.5 gallons |
| Transmission Type | Hydrostatic |
| Blades | 3 |
| Deck Type | Fabricated |
| Turning Radius | Zero-Turn |
| Warranty | 3 years |
Defines operational terms and outlines the machine's intended use and general operation.
Covers regulations and safe practices for transporting and towing with the machine.
Explains the importance of dealer service and how to identify the machine using its number.
Introduces symbols found on the machine and manual, stressing their importance.
Explains warning symbols, safety cautions, and compliance marks for safe operation.
Details symbols related to machine controls, hazards, and protective measures.
Covers fundamental safety rules for operation, operator responsibility, and general precautions.
Details essential PPE like footwear, eye and hearing protection for operator safety.
Critical safety advice for operating on slopes, including angle limits and terrain precautions.
Highlights risks to children and essential precautions to keep them away from the machine.
Provides critical safety instructions for refueling, handling, and storing gasoline.
Safety precautions during maintenance, battery handling, and acid hazards.
Covers electrical sparking hazards, proper ventilation, and general electrical safety.
Safety procedures for loading, unloading, and securing the machine for transport.
Warns about hydraulic oil hazards and provides information on spark arrestors.
Identifies the primary controls and their positions on the machine's console and frame.
Explains the operation and adjustment of the steering control levers for movement and turning.
Details the operation of the parking brake, throttle control, and blade engagement switch.
Covers the ignition switch, choke control for cold starts, and the machine's fuses.
Information about the fuel tank capacity and the operation of the fuel shut-off valve.
Explains how to adjust cutting height, bypass linkages, and the operator's seat.
Covers adjustments for steering alignment using the tracking knob and the function of the hour meter.
Guidance for new operators on familiarizing with controls and basic steering techniques.
Essential checks and conditions to fulfill before starting the engine.
Step-by-step procedures for starting the engine and running the mower.
Information on weak batteries and using jumper cables, plus general running instructions.
Advice for safe slope operation and achieving optimal mowing results.
Procedures for safely stopping the mower's engine and moving the machine manually.
Outlines routine maintenance tasks and their required intervals, plus general checks.
Covers battery maintenance, safety system checks, and parking brake functionality.
Procedures for checking tire pressures, adjusting rollers, servicing belts, and blade maintenance.
Detailed steps for adjusting mower deck level and servicing caster wheels.
Routine cleaning procedures for the machine, especially the deck, and associated warnings.
Details the lubrication schedule, points for greasing, and transaxle fluid change.
Outlines the lubrication schedule and details specific points for greasing.
Step-by-step procedure for changing the transaxle fluid and filters.
Covers problems like engine not starting, running rough, or seeming weak.
Addresses issues with machine movement, mower deck engagement, and battery charging.
Solutions for uneven mowing results, engine overheating, and transaxle leaks.
Detailed steps for preparing the machine for storage to prevent damage and ensure readiness.
Advice on ordering parts and scheduling annual maintenance for optimal performance.
Illustrates the electrical wiring of the machine, including key switch and safety systems.
Lists torque values for various fasteners and hardware grades.
Provides comprehensive data on engine, transmission, frame, dimensions, and productivity.
Information on labels indicating compliance with USA and state-specific requirements.
Checklist for initial checks and services performed at delivery.
Lists tasks for 10, 25, 50, 100, and 300-hour service intervals.
Details the maintenance procedures to be performed at least once per year.
