53
TECHNICAL DATA
Frame
Cutting Width 48" / 122cm
Cutting Height 1.5 - 4" / 3.8 - 10.2 cm
Uncut Circle 0
Number of Blades 3
Blade Length 16¼" / 42 cm
Nose Rollers Yes
Sprung Seat Standard
Hour Meter Standard
Blade Engagement Electromagnetic Clutch
Deck Construction Stamped
Productivity 2.5 acres/h / 10117.1 m
2
/h
Dimensions
Weight 595 lbs / 270 kg
Base Machine Length 74½" / 189 cm
Base Machine Height 47" / 119 cm
Base Machine Width 46½" / 118 cm
Overall Width, Chute Up 48½" / 123 cm
Overall Width, Chute Down 59¾" / 152 cm
RZ4824F
Engine
Manufacturer Kawasaki
Type FR730V
Power 24 hp
1,2)
Lubrication Pressure with oil filter
Fuel Min 87 octane unleaded (Max
ethanol 10%, Max MTBE 15%)
Fuel tank capacity 3.5 gallons / 13.25 liters
Cooling Air cooled
Air filter Standard
Alternator 12V
Starter Electric
Transmission
Transmission Hydrostatic transaxles
Speed and direction controls Dual levers, foam gripped
Speed forward 0-6.5 mph / 0-10.5 km/h
Speed reverse 0-3.5 mph / 0-5.6 km/h
Brakes Mechanical parking brake
Front caster tires, smooth tread 11 X 6-5 4 ply
Rear tires, turf pneumatic 18 x 8.5-8
Tire pressure 15 PSI / 103 kPa / 1 bar
1)
The power rating of the engines indi-
cated is the average net power output
(at specified rpm) of a typical production
engine for the engine model measured
to SAE standard J1349/ISO1585. Mass
production engines may differ from this
value. Actual power output for the engine
installed in the final machine will depend
on the operating speed, environmental
conditions and other variables.
2)
Refer to the engine manufacturer's
owner manual for engine specifications.
To Next Page
Loading...
