To Next PageTo Next Page
Need help?Do you have a question about the Husqvarna RZ46215 and is the answer not in the manual?
General| Cutting Width | 46 inches |
|---|---|
| Transmission | Hydrostatic |
| Deck Material | Steel |
| Fuel Capacity | 3 gallons |
| Weight | 500 lbs |
| Engine Displacement | 724cc |
| Speed | Up to 6.5 mph |
| Warranty | 3 years |
| Cutting Height | 1.5 to 4 inches |
Instructions and warnings for operating the mower on lawns.
Description of the warning symbol indicating potential injury or death.
Symbols for safety, parking brake, certification, and protective equipment.
Symbols related to safe operation, maintenance, and distance.
Symbols denoting specific hazards like danger, battery acid, and rotating blades.
General safety instructions and warnings about the cutting machine's capabilities.
Continued safety guidelines for operation, PPE, and environmental hazards.
Warning about hazardous chemicals, including carbon monoxide, in engine exhaust.
Essential personal protective equipment (PPE) to use while operating the mower.
Additional safety measures for slope operation and avoiding hazards.
Safety warnings concerning children around the mower and their supervision.
Safety precautions to follow during general maintenance procedures.
Warnings about electrical sparking and safe practices around the battery.
Safety rules for general operation, including ventilation and part usage.
Safety instructions for transporting the machine on vehicles or trailers.
Diagram showing the location of all machine controls.
How to operate steering controls for movement and turning.
How to use the throttle to adjust engine speed and blade rotation.
How to engage and disengage the mower blades.
How to use the ignition switch to start and stop the engine.
Using the choke control for cold engine starts.
Fuel tank capacity, fuel type, and refueling safety instructions.
How to adjust the mower deck cutting height.
Adjusting the tracking knob for straight machine alignment.
Guidance for new operators on zero-turn mower maneuverability.
Detailed explanation of steering controls for various movements.
Pre-operation checks and preparations for starting the machine.
Final steps for engine start, ignition key, and initial speed setting.
Instructions for jump-starting the mower with a weak battery.
Procedures for operating the mower, including brake release and blade engagement.
Safety guidelines and procedures for operating the mower on slopes.
How to check and adjust the parking brake functionality.
