Husqvarna RZ4219 BF User Manual

OPERATION
Open the fuel valve.
Open the fuel valve
8050-010
Press in and turn the ignition key to the start position
Turn to START position
8050-135
When the engine starts, immediately release the
ignition key back to the run position,
IMPORTANT INFORMATION
Do not run the starter for more than 5 seconds
each time. If the engine does not start, wait
approximately 10 seconds before retrying.
26
Release ignition to the RUN position
8050-136

Husqvarna RZ4219 BF Specifications

General

Engine Power	19 HP
Transmission	Hydrostatic
Deck Material	Steel
Cutting Width	42 inches
Engine	Briggs & Stratton
Blade Engagement	Electric
Seat Type	High-back
Warranty	3 year
Turning Radius	Zero-turn