MAINTENANCE
Tire Pressures
All tires should be at 15 psi / 103 kPa / 1 bar.
\
\\
\\
\
Check tire pressures
8011-564
Parking Brake
Visually check that no damage is found on the lever,
cables, or switch belonging to the parking brake.
Perform a standstill test and check that there is
sufficient braking action.
To adjust the parking brake, contact the Husqvarna
service workshop.
IMPORTANT INFORMATION
The machine must be absolutely standing still
when applying the parking brake.
WARNING!
Faulty adjustment will result in
reduced braking ability and can
cause an accident.
Parking brake
8058-020
Husqvarna-45
To Next Page
Loading...
