THERMAL PROTECTION
• The dust extractor is equipped with a safety thermal protector to prevent motor from overheating.
Should thermal protector activate, turn off machine, unplug power cord and check for full dust bag,
vacuum hose clog or filter blockage. It may take up to 45 minutes for the thermal protector to reset.
GROUNDING INSTRUCTION
• The dust extractor must be grounded. If it should malfunction or breakdown, grounding provides a path
of least resistance for electric current to reduce the risk of electric shock. The dust extractor is equipped
with a cord having an equipment-grounding conductor and grounding plug. The plug must be inserted
into an appropriate outlet that is properly installed and grounded in accordance with all local codes and
ordinances.
SAFETY LABEL
• The following label appears on the machine, next to the
machines rating plate. Replace label if it is missing,
becomes damaged or illegible. Failure to follow this
warning label may result in fire, electric shock or injury.
1.1. Type plate
To Next Page
Loading...
Need help?
General
