Need help?Do you have a question about the Husqvarna Soff-Cut 2500 and is the answer not in the manual?
Focuses on safe operation, handling, and understanding machine functions.
Lists approved personal safety items to be used when working with the saw.
Instructions for registering the new 2500 saw with Husqvarna Construction Products.
Explains the meaning of signal words like WARNING, CAUTION, and NOTICE.
Details critical safety hazards, including modification warnings and specific hazards like asphyxiation.
Guidelines for operator protection, including PPE, awareness, and body positioning.
Ensures a safe environment by keeping others out and managing fuel safely.
Critical safety measures for operating the saw and its blade, including guards and proper use.
Details on choosing the correct Excel Series diamond blade for various aggregate types.
Provides detailed steps for installing the diamond blade and skid plate.
Identifies and explains the function of various parts and controls on the saw using labeled diagrams.
Procedure for starting the engine, including choke and key switch operation.
Essential checks for fuel, oil, guards, and overall machine condition before use.
Steps for lowering the blade and beginning the sawing process.
Guidance on adjusting forward speed, cut depth, and handling the saw.
Explanation of the digital display, hour meter, volt meter, and tachometer gauges.
Precautions for safely handling gasoline, including refueling and storage.
Details on recommended fuel types, octane ratings, and oil disposal.
Instructions for checking, adding, and changing engine oil and servicing the air filter.
Guidance on checking transmission oil levels and adjusting the neutral position.
Focuses on maintaining the battery, saw controls, belts, and blade shaft bearings.
Covers cleaning, inspecting guards, blades, skid plates, and provides a maintenance schedule.
Recommendations for cutting contraction joints based on concrete thickness and other factors.
Details on the four essential components needed for the Soff-Cut Ultra Early Entry system.
Solutions for problems causing surface damage to the cut.
Troubleshooting steps for rough running, backfiring, or lack of full speed.
Diagnosing and fixing issues preventing the engine from starting.
Guidance on fixing problems where the saw pulls to one side.
Detailed technical data including engine, blade, dimensions, noise, and vibration levels.
Information on the machine's compliance with relevant EC directives and standards.
Details the warranty period and terms for the saw, engine, and replacement parts.
To Next Page
General
