To Next PageTo Next Page
Need help?Do you have a question about the Husqvarna ST 324P and is the answer not in the manual?
General| Clearing Width | 24 inches |
|---|---|
| Auger Type | Serrated |
| Drive System | Friction Disc |
| Weight | 229.3 lbs |
| Engine Type | 4-cycle |
| Engine Displacement (cc) | 208 cc |
| Stages | Two-stage |
| Drive Type | Track drive |
| Number of Forward Speeds | 6 |
| Number of Reverse Speeds | 1 |
| Power Steering | No |
| Electric Start | Yes |
| Remote Chute Rotation | Yes |
| Impeller Diameter (in) | 12 inches |
| Heated Hand Grips | No |
| Headlight | Yes |
| Engine Displacement | 208 cc |
| Reverse Speeds | 1 |
| Chute Control | Remote |
| Clearing Height | 23 inches |
| Intake Height | 23 inches |
Parts list for the main auger and impeller assembly, including ribbons and bearings.
Components for skid plates and trim pieces attached to the auger housing.
Parts list for the drift bar cutter, including fasteners and washers.
Parts for the main control panel, levers, and associated hardware.
Components of the discharge chute, deflector, and control mechanisms.
Parts for the chute deflector shield and its mounting straps.
Components for the chute rotator mechanism and steer cable system.
Parts for the main handle bars, including grips and panel brackets.
Components related to handle controls, console panel, and grips.
Parts for the control rods, springs, and linkage systems on the handles.
Basic fasteners like rivets, washers, and retainers for the drive system.
Overall diagram of the drive system components and their arrangement.
Detailed list of parts for the drive system, including brackets, springs, and shafts.
Parts for the engine, frame, and engine mounting plate.
Components related to the engine cover.
Parts for pulleys, belts, idlers, and belt guides.
Parts for the left and right wheel assemblies.
Various hardware items included in a parts bag, like bolts, nuts, and knobs.
Components for skid plates and shifter rod assemblies.
Decals for the console, auger, and safety instructions.
Warning decals including danger, safety, and operational instructions.
Parts for the engine cylinder, head, piston, crankshaft, and camshaft.
Parts like flywheel, starter, fuel tank, and muffler for the engine.
Components for spark plug, switches, governor, recoil starter, and carburetor.
Terms, limitations, and exclusions of the manufacturer's warranty.
Owner's duties for maintenance and what damages are not covered by warranty.
Specific warranty limitations and procedures for obtaining service.
Chart detailing warranty periods for various product types and components.
Warranty coverage for replacement parts and accessories.
