To Next PageTo Next PageWhat to do if Husqvarna T435 Chainsaw engine does not start and the starter pawls are blocked?
If your Husqvarna Chainsaw engine won't start, the starter pawls might be blocked. Try adjusting or replacing the starter pawls. Also, clean around the pawls.
What to do if Husqvarna Chainsaw engine does not start because the spark plug is dirty?
If the engine of your Husqvarna Chainsaw doesn't start and the spark plug is dirty or wet, make sure to dry and clean the spark plug.
What to do if Husqvarna Chainsaw engine does not start and the fuel tank is filled with chain oil?
If your Husqvarna Chainsaw engine doesn't start and the fuel tank is filled with chain oil, and you have not tried to start the product, drain the fuel tank. If you have tried to start the product, speak to your servicing dealer.
What to do if Husqvarna T435 Chainsaw engine does not start and the spark plug is loose?
If your Husqvarna Chainsaw engine does not start and the spark plug is loose, tighten the spark plug.
Visual indicators on the chainsaw for safe operation.
Pictorial representations used within the manual to convey information.
Identification of various labels found on the chainsaw for regulatory and safety information.
A welcoming message from Husqvarna to the new owner of the product.
Diagram and list identifying major components of the chain saw.
Initial checks and preparations required before operating the chainsaw.
Essential safety rules and warnings for safe chainsaw operation.
Emphasizes the importance of user judgment and awareness in avoiding hazards.
Essential safety gear required for operating the chainsaw to prevent injury.
Explanation and inspection of safety features built into the chainsaw.
Function and operation of the chain brake and front hand guard for kickback protection.
Safety features preventing accidental throttle operation and chain derailment.
How the vibration damping system reduces user exposure to vibrations.
Operation of the stop switch and the function and safety of the muffler.
Advice on selecting and maintaining cutting equipment for safety and performance.
Explains terms and specifications related to the chainsaw bar and chain.
Instructions and precautions for sharpening the chainsaw chain cutters.
Procedures for adjusting depth gauge and tensioning the chain for optimal performance.
Importance and methods for lubricating the chain and bar for optimal function and safety.
Checks for wear on the drive sprocket and chain for safe operation.
Step-by-step guide for installing the guide bar and saw chain onto the chainsaw.
Guidelines for mixing gasoline and two-stroke oil and recommended fuel types.
Information on the type and use of chain oil for lubrication.
Safety measures to follow when refueling the chainsaw.
Guidelines for safely transporting and storing the chainsaw and fuel.
Detailed steps for safely starting the chainsaw, including choke and primer use.
Method for safely shutting down the chainsaw engine.
A checklist of safety and operational checks before using the chainsaw.
Basic principles and advice for safe and effective chainsaw operation.
Fundamental safety principles to follow during chainsaw use, including environmental awareness.
How to maintain a secure stance and grip for control and safety.
Techniques and awareness to prevent kickback incidents during operation.
Specific practices for using chainsaws safely when working at elevated positions.
Procedures for releasing a stuck saw and fundamental cutting techniques.
Methods for cutting logs supported at one or both ends to avoid jamming.
Techniques for safely cutting branches from felled trees.
Safe methods for felling tree tops, considering lean and environmental factors.
How to make topping and directional cuts for controlled tree felling.
Making the felling cut and creating the felling hinge for controlled tree fall.
Safe procedures for dealing with trees that have fallen incorrectly or are under tension.
Detailed explanation of kickback causes and prevention methods.
Applying basic cutting techniques for processing logs.
Overview of user-maintainable parts and carburetor tuning for optimal performance.
Adjusting the high-speed jet and verifying correct carburetor settings.
Inspecting the chain brake and front hand guard for proper function and wear.
Verifying the operation of the throttle lockout and chain catcher safety features.
Maintenance and checks for vibration damping, stop switch, and muffler.
Cleaning and inspecting the muffler and spark arrestor screen for optimal performance and safety.
Steps for replacing a broken or worn starter cord on the chainsaw.
Procedures for tensioning and fitting the starter recoil spring and assembly.
Cleaning and checking the air filter and spark plug for engine performance.
Procedure for lubricating the bar tip sprocket for longevity.
How to adjust the automatic oil pump for chain lubrication.
Cleaning the cooling system components to prevent overheating.
A detailed schedule for daily, weekly, and monthly maintenance tasks.
Lists recommended bar and chain combinations for optimal performance and safety.
Information and tools for filing and maintaining chainsaw chains.
Outlines owner's obligations and rights regarding the emissions control system warranty.
Details covered parts, exclusions, and how to file a warranty claim.
Specific safety measures and understanding of kickback hazards.
Additional safety advice for chain saw operators, including fatigue and handling.
General
