To Next PageTo Next Page
Need help?Do you have a question about the Husqvarna TC 138L and is the answer not in the manual?
General| Engine Manufacturer | Briggs & Stratton |
|---|---|
| Net Power at Preset rpm | 8.6 kW @ 2600 rpm |
| Cylinder Displacement | 500 cm³ |
| Cylinders | 1 |
| Fuel Type | Gasoline |
| Fuel Tank Volume | 5.7 L |
| Oil Filter | Yes |
| Transmission Manufacturer | Tuff Torq |
| Cutting Width | 97 cm |
| Cutting Height Min | 38 mm |
| Cutting Height Max | 102 mm |
| Collector Volume | 220 L |
| Blade Engagement | Manual |
| Engine Displacement | 500 cm³ |
| Fuel Tank Capacity | 5.7 L |
| Drive System | Pedal-operated |
| Battery | 12 V 28 Ah |
| Cutting Methods | Collect/Mulch |
| Speed Settings | Variable |
| Engine Type | 4-stroke |
| Wheel Size | Front: 15 in, Rear: 18 in |
Read and understand instructions, familiarize controls, and get proper use training.
Inspect and remove debris, wear protective gear, check area for objects.
Operate safely, consider slopes, use care with loads, watch for traffic.
Ensure secure equipment, safe storage practices, and regular checks.
Identifies parts included in packaging that require assembly before use.
Details the installation of steering components like the wheel and adapter.
Covers the components and process for assembling the seat.
Step-by-step instructions for mounting the seat assembly onto the tractor.
Procedure for adjusting the seat position for operator comfort.
Instructions for assembling the bagger components to the tractor.
Procedure for adjusting hanger brackets for proper bagger alignment.
Adjusting the vertical position of the bagger mounts.
Adjusting the horizontal position of the bagger mounts.
Instructions for assembling the bag collector components.
Procedure for removing the center discharge chute.
Steps for mounting the grass container onto the tractor.
Instructions for installing the bag dump lever and extension.
Steps for installing the spring latch for the bagger.
Procedure for adjusting the hanging brackets on the bagger.
Adjusting the horizontal position of bagger attachments.
Adjusting the bagger mounting brackets.
Steps for installing the grass container onto the tractor.
Instructions for removing the mower deck from the tractor.
Adjusting the horizontal position of bagger components.
Adjusting the hanging hooks for the bagger.
Identifies and describes the location of all operator controls.
Instructions for safely fueling the mower with correct gasoline type.
Procedure for checking and maintaining the engine oil level.
Ensuring tires are properly inflated to the specified PSI.
Verifies the operator presence sensor is functioning correctly.
Verifies the Reverse Operation System (ROS) functionality.
Instructions for converting the mower to mulch mode.
Instructions for converting the mower to rear discharge.
Instructions for converting the mower to use a bagger.
Essential checks to perform on the mower before each operation.
Guidelines for cleaning the tractor and mower safely.
Procedure for cleaning debris from the steering plate.
Essential checks to perform on the mower before each operation.
Guidelines for cleaning the tractor and mower safely.
Procedure for cleaning debris from the steering plate.
Essential checks to perform before using the tractor.
Instructions for cleaning the tractor chassis and components.
Procedure for cleaning the guide plate.
Essential checks to perform before using the tractor.
Guidelines for cleaning the tractor and mower safely.
Procedure for cleaning debris from the steering plate.
Step-by-step guide for safely removing the tractor battery.
Step-by-step guide for safely installing the tractor battery.
Verifies the operator presence sensor is functioning correctly.
Verifies the Reverse Operation System (ROS) functionality.
Instructions for removing, sharpening, and installing mower blades.
Steps for removing the mower drive belt.
Steps for installing the mower drive belt.
Instructions for removing the mower drive belt.
Instructions for installing the mower drive belt.
Adjusting mower deck height visually for side-to-side balance.
Precisely adjusting mower deck height for side-to-side balance.
Adjusting mower deck height for proper front-to-back pitch.
Diagnosing and resolving issues preventing engine startup.
Troubleshooting starter motor and related electrical issues.
Diagnosing causes for rough or uneven engine operation.
Identifying issues causing loss of engine power.
Troubleshooting causes of engine overheating.
Diagnosing and resolving battery charging problems.
Troubleshooting issues with the mower's lighting system.
Diagnosing causes of excessive machine vibration.
Resolving issues that lead to uneven grass cutting.
Steps for preparing and storing the mower after the mowing season.
Information required when ordering spare parts for service.
