To Next PageTo Next Page
Need help?Do you have a question about the Husqvarna TC 342T and is the answer not in the manual?
General| Engine Manufacturer | Briggs & Stratton |
|---|---|
| Engine Name | Endurance Series V-Twin |
| Engine Displacement | 724 cm³ |
| Power Output | 22 hp |
| Oil Filter | Yes |
| Transmission Type | Hydrostatic |
| Transmission Manufacturer | Tuff Torq |
| Blades | 2 |
| Deck Material | Steel |
| Anti-Scalp Wheels | 4 |
| Collector | Available as accessory |
| Mulch Kit | Included |
| Tire Size, Rear | 20x10-8 |
| Vibration Level | 2.5 m/s² |
| Fuel Tank Volume (with reserve) | 15.1 l |
| Cutting Width | 107 cm |
| Uncut Circle | 30 cm |
| Cutting Height, min-max | 38 - 102 mm |
| Blade Engagement | Electric |
| Turning Radius | 16 in |
| Engine Type | 4-stroke, V-twin |
| Engine Lubrication Type | Full pressure with oil filter |
| Tire Size, Front | 15x6-6 |
Read instructions, understand controls, and ensure operator competency before use.
Safe operating practices, including slope handling and attachment use.
Daily checks for safety and proper operation, including fluid levels and brake function.
Lists common causes for the engine failing to start and their solutions.
Addresses issues where the starter motor does not engage or turn the engine.
Identifies causes for the engine operating rough, sputtering, or unevenly.
Explains potential issues causing a loss of engine power.
Details factors that can lead to engine overheating and how to prevent it.
Troubleshooting steps for a battery that is not holding a charge.
