Need help?Do you have a question about the Husqvarna TF 334 and is the answer not in the manual?
Install the transport wheel, ensuring it can lift correctly.
Mount the working tools, paying attention to direction and diameter limits.
Attach the protective wings to safeguard against flying debris.
Mount and adjust the handlebars for optimal control and ergonomics.
Secure the cable clamps properly to manage wiring.
Identification of all main machine parts and their functions.
Location and explanation of information found on the machine's identification plate.
Correct positioning of the transport wheel for operation.
Adjusting the height and lateral position of the handlebars.
Guidance on operating the machine in the forward direction.
Precautions and instructions for operating the machine in reverse.
Procedure to stop the rotating cutting tools.
Procedure to shut down the engine.
Instruction to close the fuel tap for safety.
Instructions on how to move the machine safely.
Ensure the machine is stopped and spark plug disconnected before adjustment.
Adjust the clutch cable tension for correct lever play.
Ensure the machine is stopped and spark plug disconnected before adjustment.
Adjust the reversing cable tension for correct lever play.
To Next Page
General
