To Next Page
A
Abigail FischerAug 1, 2025
What to do if my Husqvarna TF338 does not activate?
- DDavid BishopAug 1, 2025
If your Husqvarna Tiller does not activate, there might be several reasons. First, ensure there is enough fuel; if not, fill it and start the machine. If the spark plug is wet, dry the electrode and try again, checking for fuel spillage from the carburetor float valve. A faulty ignition system could also be the cause; in this case, change the spark plug and inspect the ignition coil and voltage wire. Issues with cylinder pressure can also prevent activation. Inspect the push rod clearance, cylinder head tightness, and remove carbon dust from the combustion chamber. Also, check the cylinder circle, valve seat, valve mounting, and assess the piston ring, piston, and cylinder for wear. Finally, ensure the spark plug is fastened properly before starting.
General
