T
Thomas FreemanAug 15, 2025
Why won't my Husqvarna X-COM R start?
- TTamara SmithAug 15, 2025
If your Husqvarna Protection Device does not start, it could be due to several reasons. First, ensure the battery isn't out of power by charging it for at least an hour, or even a few hours if it has experienced deep discharge. Check that all cables are correctly connected using the wiring diagram, and replace any defective cables. If the battery is defective, replace it. If none of these steps work, there may be a circuit board fault, requiring you to replace the entire product.