Need help?Do you have a question about the Husqvarna YTH160 and is the answer not in the manual?
General| Engine Manufacturer | Briggs & Stratton |
|---|---|
| Engine Power | 16 HP |
| Engine Displacement | 500 cc |
| Cutting Width | 42 inches |
| Cutting Height Range | 1.5 - 4 inches |
| Transmission Type | Hydrostatic |
| Transmission | Hydrostatic |
| Deck Material | Steel |
| Number of Blades | 2 |
| Weight | 460 lbs |
| Engine Type | Single Cylinder |
| Fuel Capacity | 2.5 gallons |
| Fuel Tank Capacity | 2.5 gallons |
| Wheel Size (Front) | 15 inches |
| Wheel Size (Rear) | 20 inches |
Learn about controls, proper use, and operator responsibilities before using the machine.
Inspect the area, wear proper attire, and handle fuel safely before operation.
Follow guidelines for safe operation, especially on slopes and when using attachments.
Keep equipment in safe condition, store properly, and perform regular checks.
Recommended maintenance schedule and checks to keep the tractor in good running condition.
Instructions for sharpening blades, ensuring equal sharpening, and tightening them securely.
Common reasons and solutions when the engine fails to start.
To Next Page