To Next PageTo Next Page
Need help?Do you have a question about the Husqvarna YTH170 and is the answer not in the manual?
General| Engine Power | 17 hp |
|---|---|
| Cutting Width | 42 inches |
| Transmission Type | Hydrostatic |
| Deck Material | Steel |
| Fuel Capacity | 2.5 gallons |
| Weight | 460 lbs |
| Engine Manufacturer | Briggs & Stratton |
| Cylinders | 1 |
| Fuel Tank Capacity | 2.5 gallons |
| Cutting Height, min | 1.5 inches |
| Cutting Height, max | 4 inches |
| Blade Engagement | Manual |
| Turning Radius | 16 inches |
| Tire Size (front) | 15 x 6-6 |
| Tire Size (rear) | 20 x 8-8 |
| Engine Type | 4-cycle |
| Engine Displacement | 500 cc |
| Wheel Size | Front: 15x6-6, Rear: 20x8-8 |
Covers training, preparation, and general operating safety.
Safe practices for maintaining and storing the equipment.
Critical warnings regarding hazardous materials and situations.
Safe procedures for filling the fuel tank with petrol.
Step-by-step guide for starting the engine, including cold starts.
Operating motion controls, driving, and deck height adjustments.
Safe procedures for shutting down the engine after use.
Diagnosing and resolving problems with engine start and operation.
