Husqvarna YTH210XP User Manual

02494
YTH210XP
Instruction manual
Please read these in struc tions care-
ful ly and make sure you un der stand
them before using this ma chine.
Anleitungshandbuch
Bitte lesen Sie diese Anleitungen sorg-
fältig durch und vergewissern Sie sich,
daß Sie diese verstehen, bevor Sie die
Maschine in Betrieb nehmen.
Manuel d’instructions
Merci de lire trés attentivement le
manuel d'instructions. Assurez-vous
d'avoir tout compris avant d'utiliser ce
tracteur.
Manual de las instrucciones
Por favor lea cuidadosamente y com-
prenda estas intrucciones an tes
de usar esta maquina.
Manuale di istruzioni
Prima di utilizzare la macchina leggete
queste istruzioni con attenzione ed ac-
certatevi di averle comprese bene.
Instructieboekje
Lees deze instructies aandachtig en
zorg dat u ze begrijpt voordat u deze
ma chine gebruikt.

Husqvarna YTH210XP Specifications

General

Engine	Briggs & Stratton
Engine Power	21 HP
Cutting Width	42 inches
Cutting Height	1.5 - 4 inches
Cutting Height Positions	6
Transmission	Hydrostatic
Deck Material	Steel
Blades	2
Turning Radius	16 inches
Warranty	2 years
Speed Range	0 - 5.2 mph
Fuel Capacity	2.5 gallons
Wheel Size	15 inches (front), 20 inches (rear)

Summary

1. Safety Rules

Operator Training and Familiarization

User training, controls familiarization, and proper equipment use for safety.

Pre-Operation Preparation

Pre-operation checks, fuel handling, and debris removal for safe operation.

Safe Operating Practices

Guidelines for safe operation, including slopes and hazard awareness.

4. Before Starting

Safe Fueling Procedures

Instructions on how to safely refuel the tractor's engine.

Engine Oil Level Check

5. Driving Operations

Starting the Engine

Step-by-step instructions for starting the tractor's engine.

Cold Starting the Hydro Transmission

Reverse Operation System (ROS)

6. Maintenance and Adjustments

Safety Precautions Before Servicing

Critical safety steps before performing maintenance or repairs.

Operator Presence and ROS System Checks

Blade Maintenance and Replacement

Brake System Checks and Adjustment

Cutting Unit Adjustment

7. Troubleshooting Engine Issues

Engine Will Not Start

Common causes and solutions for the engine failing to start.

Starter Motor Issues

Engine Overheating Problems