2
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
Reach-in Joining Instructions
P/N 0387177_K
PARTS LIST
Item
Quantity Description
RL/RM RLN RLNI
RM/RMF RMN RLNIE RLT
1. 2 2 4 2 Donut Gasket
2. 1 1 2 2 Gasket, 1 x
1
/2 x 180 in.
3. 1 1 2 1 Gasket,
1
/2 x
1
/4 x 180 in.
4. 8 8 14 6 Cap Screw
5
/16 -18 x 1
1
/4
5. 8 8 14 6 Split Lock Washers
5
/16
6. 1 1 2 1 Joint Molding
7. 5 5 10 5 Binder Post and Screw
8. 1 1 2 1 Splice Connector
E. Remove back panels from ends to
be joined by lifting up and out near the
bottom. No tools are necessary. The RLT
models have upper and lower back panels
that must be removed.
F. Remove joint molding from any door
frames that will be joined to another case.
G. RLNI Only: Remove screws and inte-
rior top panel on both sides of the island
case end to be joined (see Figure 1).
E
G
G
RLNI Only
Alignment Pin
F
E
RL / RM / RMF
RLN / RMN
and RLNI
RLT
To Next Page
Loading...
