3 G/M Codes
3 - 107
Program Example:
N01 G00 X50.0 Z50.0; Fast positioning to a specified point
N02 G01 Z100.0,A45.0; end point absolute Z-coordinate is100, tool path is in a
45° phase difference with the level axis.
X-coordinate will be 100 after program execution.
Fig. 3-90
Details:
Angle indication:
Starting from the first axis (horizontal axis) of the selected plane, the
counterclockwise direction (CCW) is positive, counterclockwise direction (CW) is
negative.
Range of angle:
00.36000.360 , for an angle exceeding the 360.00 range, divide the angle
by 360.00 degrees and take the remainder. E.g., for an angle of 400.00 degrees,
the remainder 40.00 after divided by 360.00 will be the specified angle.
Other relevant functions:
Line angle Chamfer/ Round-angle chamfer
EX1
N1 G01 X___,A___,C___
N2 G03 X___ Z___ I___ J___
To Next Page
Loading...