HUST CNC H6D-T Manual
3 - 108
Fig. 3-91
EX2
N1 G01 X___,A___,R___
N2 G03 X___ Z___ I___ J___
Fig. 3-92
3.31 Geometry function command
Functions and Purposes:
If the intersection point of two line segments is hard to get, using inclination of the first
line and absolute coordinates of the end point of the second line and its inclination, the
end point of the first line can be determined automatically by the internal system, with
the move path controlled automatically.
Command Format:
G01,A___ ; Specifies inclination of the first line
To Next Page
Loading...