3 G/M Codes
3 - 111
2. Geometry function command 1 can be performed after a line angle is specified.
EX1
N1 G01 Xx2 ,Aa1
N2 G01 ,Aa2N3 G01 Xx3 Zz3 ,Aa3
Fig. 3-96
3.32 Automatic calculation of Line-Arc intersection point
Functions and Purposes:
Automatically calculate the coordinates of a line-arc intersection point when it is not
specified, with automatic control of the move path,
Command Format:
G01,A___ ; Specifies inclination of the first line
G02(G03) X___Z___P___Q___H___ ; Specifies the end point and absolute
coordinates of the center of the circle of
the next block, and the selection of the
intersection point.
Note:
P, Q: the absolute coordinates of centers of arcs of the X, Z-axes
H Line-arc intersection selection
Location
E
Horizontal Axis
To Next Page
Loading...