HUST CNC H6D-T User Manual

2 Operation
2 - 7
* MDI Mode Screen
The following screen displays when the “Mode Selection” knob is in “MDI”:
Fig. 2-8
Under this mode, input node command directly and press “Start” key and you can
execute this node command immediately
Example:
1. Edit M03 S1000:
2. Press “Enter” key.
3. Press “Start” key.
After the above-said operation, the Spindle will make CW turning (speed: 1000
rpm/min).

HUST CNC H6D-T Specifications

General

Brand	HUST CNC
Model	H6D-T
Category	Controller
Language	English