HUST CNC H6D-T User Manual

2 Operation
2 - 11
Copy and Paste
1. Press the “Copy” key and the screen will display “Please move the cursor to
confirm the copy start node number for copy and then press the Enter key to
confirm the selection” (as per Fig. 2-10).
Fig.2-10
2. More the cursor to the starting position of the block to be copied and then press
“Enter” key to confirm (as per Fig. 2-11).
Fig.2-11

HUST CNC H6D-T Specifications

General

Brand	HUST CNC
Model	H6D-T
Category	Controller
Language	English