HUST CNC H6D-T - Page 235

5 Connections
5 - 23
Structure of wiring (2)
All of the SIO board must used the same DC24V power supply except to the AC
output board.
Fig.5-27
40-pin Bull-horn
harness; Group 2;
CONNECT Board
port
I120~I43 (24in)
O112~O127 (16out)
40-pin Bull-horn
harness; Group 1;
CONNECT Board
port
I96~I119(24in)
O96~O111(16out)
24V Power Input 24V Power Input
1. Use in combination as required
2. 10 pin white connecto
3. Can be connected to 3 optional boards
4. Can be connect 4 modules maximum .
5. NPN RELAY BOARD provide 8 dry contacts. Max. current for each output of he PCB
is 1A .
6. AC power output module board provide 8 AC110V outputs. M ax. current for each
output of the PCB is 1A.
7. DC power module board provide 8 DC24V outputs. Max. current for each output of the
PCB is 1A .
Accessories
8 OUT RELAY BOARD
AC POWER OUTPUT
MODULE BOARD
DC POWER OUTPUT
MODULE BOARD