7 MCM Parameters
7 - 7
MCM
No.
Factory
Default
Setting
Unit Description Setting
When MCM 502 2, the function can then be sustained.
530 0 G31 input motion stop at hardware
531 0
Format setting
=0 standard,
=1 the system will automatically add a decimal point to
even numbers,
=2 line editing,
=4 automatically added with a decimal point in
programming
532 2.000 mm
Mill mode Setting the backlash of G83
533 4096 pulse Setting the following error count for testing
534
Testing the function of axial setting of the servo following
error bit0-X..
535 Controller ID number
536
Minimum slope setting of the Auto Teach function (with
use of C040)
537
First distance setting of the Auto Teach function ( with use
of C040)
538 0 G41 and G42 processing types
539 System reserved
540 0 Adjustment of the axis feedback direction.
541 0 Arc type
541-560
System Reserved
561 0 "S" curve accel./decel. profile setting for the X-axis
562 0 "S" curve accel./decel. profile setting for the Y-axis
563 0 "S" curve accel./decel. profile setting for the Z-axis
564 0 "S" curve accel./decel. profile setting for the A-axis
565 0 "S" curve accel./decel. profile setting for the B-axis
566 0 "S" curve accel./decel. profile setting for the C-axis
567 0 "S" curve accel./decel. profile setting for the U-axis
568 0 "S" curve accel./decel. profile setting for the V-axis
569 0 "S" curve accel./decel. profile setting for the W-axis
570~580
System Reserved
581 9999999 mm X-axis, Software OT limit, (+) direction (Group 1)
582 9999999 mm Y-axis, Software OT limit, (+) direction (Group 1)
583 9999999 mm Z-axis, Software OT limit, (+) direction (Group 1)
584 9999999 mm A-axis, Software OT limit, (+) direction (Group 1)
585 9999999 mm B-axis, Software OT limit, (+) direction (Group 1)
586 9999999 mm C-axis, Software OT limit, (+) direction (Group 1)
587 9999999 mm U-axis, Software OT limit, (+) direction (Group 1)
588 9999999 mm V-axis, Software OT limit, (+) direction (Group 1)
589 9999999 mm W-axis, Software OT limit, (+) direction (Group 1)
590-600
System Reserved
601 -9999999 mm X-axis, Software OT limit, (-) direction (Group 1)
602 -9999999 mm Y-axis, Software OT limit, (-) direction (Group 1)
603 -9999999 mm Z-axis, Software OT limit, (-) direction (Group 1)
604 -9999999 mm A-axis, Software OT limit, (-) direction (Group 1)
605 -9999999 mm B-axis, Software OT limit, (-) direction (Group 1)
606 -9999999 mm C-axis, Software OT limit, (-) direction (Group 1)
607 -9999999 mm U-axis, Software OT limit, (-) direction (Group 1)
608 -9999999 mm V-axis, Software OT limit, (-) direction (Group 1)
609 -9999999 mm W-axis, Software OT limit, (-) direction (Group 1)
To Next Page
Loading...