HUST CNC H6D-T Manual
7 - 22
7.1 Description of MCM Machine Constants
The decimal format for MCM data in this section is based on 4/3 format.
MCM #1~#36 are for G54~G59 work coordinates data. The setting value is the distance
between the origin of each work coordinate system and the machine HOME position.
All input data have the same format and unit as shown below:
1. G54 (1
st
) Work Coordinate, X-axis.
2. G54 (1
st
) Work Coordinate, Y-axis.
3. G54 (1
st
) Work Coordinate, Z-axis.
4. G54 (1
st
) Work Coordinate, A-axis.
5. G54 (1
st
) Work Coordinate, B-axis.
6. G54 (1
st
) Work Coordinate, C-axis.
7. G54 (1
st
) Work Coordinate, U-axis.
8. G54 (1
st
) Work Coordinate, V-axis.
9. G54 (1
st
) Work Coordinate, W-axis.
Format . Unit: mm (Default=0.000)
MCM# 10~20 System Reserved
21. G55 (2
nd
) Work Coordinate, X-axis.
22. G55 (2
nd
) Work Coordinate, Y-axis.
23. G55 (2
nd
) Work Coordinate, Z-axis.
24. G55 (2
nd
) Work Coordinate, A-axis.
25. G55 (2
nd
) Work Coordinate, B-axis.
26. G55 (2
nd
) Work Coordinate, C-axis.
27. G55 (2
nd
) Work Coordinate, U-axis.
28. G55 (2
nd
) Work Coordinate, V-axis.
29. G55 (2
nd
) Work Coordinate, W-axis.
Format . Unit: mm (Default=0.000)
MCM# 30~40 System Reserved
41. G56 (3
rd
) Work Coordinate, X-axis.
42. G56 (3
rd
) Work Coordinate, Y-axis.
43. G56 (3
rd
) Work Coordinate, Z-axis.
44. G56 (3
rd
) Work Coordinate, A-axis.
45. G56 (3
rd
) Work Coordinate, B-axis.
46. G56 (3
rd
) Work Coordinate, C-axis.
47. G56 (3
rd
) Work Coordinate, U-axis.
48. G56 (3
rd
) Work Coordinate, V-axis.
49. G56 (3
rd
) Work Coordinate, W-axis.
Format . Unit: mm (Default=0.000)
MCM# 50~60 System Reserved
MCM# 61~69 G57 (4
th
) Work Coordinate.
MCM# 70~80 System Reserved
To Next Page
Loading...