HUST CNC H6D-T - Page 338

HUST CNC H6D-T Manual
9 - 14
9.3 USB Device Mode
PC and the H6D-T controller are connected via USB connection. Now, the H6D-T
controller plays the role as the USB device side, i.e. a mobile diskette while PC plays
the role as the USB host side. In this mode, PC can read data information such as user’s
programs, user’s variables, machine parameters, etc. from the H6D-T controller. Also,
PC can write its data in the controller.
9.4 USB Host Mode
In this mode, H6D-T plays the role as the USB host and can directly read / write data
information such as system files, screen files, user’s programs, user’s variables,
machine parameters, etc in a mobile diskette via the USB interface on the back of the
controller. Also it can store the data in the mobile diskette from the controller.
9.5 Operational Instruction of A Standard H6D-T Transmission Interface
To select USH-H mode on the switch screen in the transmission mode, you shall enter
the embedded transmission operation interface as shown in Fig 9-9.
Fig 9-7
Descriptions of function keys:
Return to Main Menu: To switch back to the transmission mode screen.
Open a folder: To open the content of the data file stored on an USB or the controller’s
optional purchase of an expandable memory cache.
Return: Returns to the last level of directory.
Copy:
Copies data.
Paste: Stores copied data.
EX With directional keys to move the cursor to the data file to be
copied, press the COPY key and then press the PASTE key, you can
create a new file.
Download: Goes to the file download interface.
Upload: Goes to the file upload interface.
: Goes to the second page in the transmission operating interface.