HUST CNC H6D-T User Manual

HUST CNC H6D-T Manual
2 - 22
* Software Version Screen
Press the “Software Version” soft key on the second page of the parameter screen to
display the version screen:
Fig. 2-25
1. Shown in the screen are system time, PLC time, screen time, ARM time and
Lattice time.
Example: System 2010 627
PLC 2010 623
System Time: June 27, 2010
PLC Time: June 23, 2010
2. Time Setting: Press “Time Set” key (indicating reverse white) and then press
key for showing year, month, day, hour, minute and second, edit the value and then
press “Time Set” again. When the screen displays “Data Loading OK” wording, it
means the time has been successfully set.
Note: Such function shall be set by use with corresponding permission.

HUST CNC H6D-T Specifications

General

Brand	HUST CNC
Model	H6D-T
Category	Controller
Language	English