2 Operation
2 - 23
* System Parameter Screen
Press the “System Parameter” soft key on the second page of the parameter screen to
display the system parameter page.
Fig. 2-26
The Advanced Parameter modification is protected by password Default Value =
123456.
To modify the Advanced Parameter, press “Modify Parameter” key and it will skip
to Password Input Page as per Fig. 2-26.
After entering correct Advanced Parameter password, the user shall be allowed to
modify the Advanced Parameter.
After entering the system parameter page, press “Change Password” key and it will
skip to the password change page. Enter current password and new password
according to the hint shown in the screen, as per Fig. 2-27.
Fig. 2-27
To Next Page
Loading...