2 Operation
2 - 41
2.2.1.5. Numerical Control Range
The numerical and functional control range of the H6D-T controller is described in the
following two tables.
Min. setting unit 0.001 mm
Max. setting unit 9999.999 mm
Min. moving unit 0.001 mm
Max. moving unit 9999.999 mm
Max. stroke 9999.999 mm
G- code G00~G99 (G01=G1)
M-code M000~M999 (M01=M1)
S-code S1~S9999 rpm
F-code 0.001~0~9999.999 mm/spin
X, Z, U, W, I, K 0.001~+/-9999.999 mm
R (Radius) 0.001~+/-9999.999 mm
G04 0 ~ 9999.999 seconds
Program number 0 ~ 600
T-code
1. There are two digits after T when no turret
is mounted; select a tool compensation
number.
2. There are four digits after a turret is
mounted; the first two digits is the tool
selection and the last two digits is
compensation number.
Memory capacity 512 K
Lead screw
compensation
0~255 pulses (related to tool resolution)
Max. Response
Speed
500 KPPS
The numerical control range varies depending on the specifications of the numerical
control unit. Refer to the operator’s manual of the machine for more information.
To Next Page
Loading...