Table of Contents
V
7.1 Description of MCM Machine Constants 7-22
8 Appendix A 8-1
Input Planning 8-1
Input Signal Format Setting 8-2
Output Point Planning 8-2
9 Appendix B - PC On-Line Operation 9-1
9.1 PC Performs Online Operation via RS232 and The Controller 9-1
9.1.1 Program Transfer From PC To CNC Controller 9-2
9.1.2 Program Transfer from CNC Controller to PC 9-3
9.1.3 Transfer MCM Data from PC to CNC Controller 9-4
9.1.4 Transfer MCM Data from CNC Controller to PC 9-5
9.1.5 Transfer Data Variable from PC to CNC controller 9-5
9.1.6 Transfer Data Variable from CNC controller to PC 9-5
9.1.7 Transfer PLC Ladder from PC to CNC controller 9-6
9.1.8 Transfer LCD Screen Display Data from PC to CNC 9-7
9.1.9 Transfer Controller System Data from PC to CNC 9-7
9.1.10 Transfer function tables from PC to CNC controller 9-8
9.1.11 PC to Controller (ARM) 9-8
9.1.12 HCON.EXE Program Operation 9-9
9.1.13 RS232C Connection 9-12
9.2 HUST H6C-T Transmission Modes 9-13
9.3 USB Device Mode 9-14
9.4 USB Host Mode 9-14
9.5 Operational Instruction of A Standard H6C-T Transmission
Interface 9-14
9.5.1 File Download Interface 9-15
9.5.2 File Upload Interface 9-18
10 Appendix C - Method for using the most often used G10 command 10-1
11 Appendix D Servo Motor W iring 11-1
To Next Page
Loading...