HUST CNC H6D-T - Page 76

HUST CNC H6D-T Manual
3 - 14
Program example
When Parabolic command P=5mm, Its symmetry axis parallel to the Z-axis machining
dimensions of the parts shown in the Figure, the finishing program may be prepared as
follows
Fig 3-12
M03 S800
G00 X10. Z10.
G00 X0.
G01 Z0. F120
M08
X30.
G05 X60. Z-40. P5000 K0 I1.
G01 X90. Z-60.
X110. Z-85.
X120.
M09
G00 Z10.
M30