1 Main-Features of HUST H6D-T Lathe CNC Controlle
1 - 1
Main-Features of HUST H6D-T Lathe CNC Controller
Available for operation with a maximum of 6 axes (depending on the actual model
number).
It can be worked with impulse command or voltage command type of server system.
Max. response speed will be 2,500,000 impulses per second (2500 KPPS). When
operated at 1 m resolution, it can even reach 150m per minute.
It achieves 0.5us of response speed for fast acceleration/deceleration control, which
is faster than 2ms response of conventional CNS digital control for 4000 times.
Simultaneous operation of speed control and position control in providing a flexible
option for the customer.
Encoder feedback function is provided for speed control and position control. It not
only achieves accurate position judgment and much easier failure detection but can
prevent the mechanical conflict in a more effective way.
It can flexibly work with Optical Scale for performing fully closed loop control in
achieving more accurate position alignment.
Automatic identification of NPN, PNP signal format at the input point without the
need to shift the switch. Further, the electrical layout is configured in a more
convenient manner for easier and flexible operation.
When activating the special action control mode, it achieves faster working speed
than the ordinary digital control model while providing much higher efficiency and
more stabilized performance.
It is available for designing convenient LCD screen for displaying the editing
system on LCD. Simple and easier for learning. Further, the user can also select PC
screen to display the edit software to carry out monitoring or program inspection.
Through RS232 interface, the user can transmit the data on PC and run the program
(hands-on learning) or execute the transmission directly via USB, SD card interface.
To Next Page
Loading...
Need help?
General
