Comments for Page: 54" Side Discharge - Deck Belt, Discharge Chute, Pulley Covers & Blades
1. Do not torque the nut; the discharge chute must pivot freely.
2. Torque to 118 ft-lbs.
3. Torque to 10 ft-lbs.
4. 781872 is used on mowers S/N 12092657 & higher.
5. 601983 is used on mowers S/N prior to 12092657.
Item Part No. Qty Name
1 113241 1 COVER, PULLEY RH 54"
2 113240 1 COVER, PULLEY LH 54"
3 602429 1 DISCHARGE CHUTE
4 602435 1 SPRING, TORSION
5 602432 1 PIN, CHUTE
6 086660 5 NT .375-16NLG8
7 792002 4 KNOB,5/16-18 X 3/4"MALE
8 797928 1 DECK BELT
9 602817 1 RUBBER BUMPER
10 113563 1 BACKING PLATE W/A
11 079210 2 FW 0.344X1.0X0.06 ZN
12 064014 2 CS .312-18X0.875HXG5
13 797696 3 BLADE, F18.50"-H-F-CW
Not Shown 601012 3 BLADE F18.50"-L-F-CW
Not Shown 797704 3 BLADE, 18.50"-MUL-F-CW
Not Shown 797712 3 BLADE, 18.50"-GAT-F-CW
14 782474 3 CW .678 X 2.250 X .187
15 781872 3 CS .625-11X1.250HXG5
Not Shown 601983 3 CS .625-11 X 2.25 HXG5ZN
16 113210 1 WALL, INNER ADJ LH 54"
17 767954 4 FW 0.379X.82X.06 HD ZN
18 025395 4 CB .375-16X 1.00 G5 ZN
19 113211 1 WALL, INNER ADJ RH 54"
54" Side Discharge - Deck Belt, Discharge Chute, Pulley Covers & Blades
Hustler X-ONE Parts Manual
Tue May 19 17:15:38 UTC 2020 8.2-4
To Next Page
Loading...
